HOBBYWELD

How HOBBYWELD works

Unlike your typical industrial gas supplier, we do not charge rental on our gas cylinders. Simply pay a one off deposit for the gas cylinder and “pay as you go” for your gas refills. We have gas mixtures available for all forms of welding, cutting and brazing – no matter if it’s steel, aluminium or stainless steel, we have the gas for you.

HOBBYWELD CYLINDER DEPOSIT

The HOBBYWELD Cylinder Deposit is a one-off, refundable charge – paid alongside the gas fill for your first cylinder. There is no limit to how long you keep the cylinder and you can exchange it as often or as little as you like.

If you need to return the cylinder, take it to any HOBBYWELD stockist for a refund (note: You will need your deposit form and a small admin charge applies, currently £10.00 +vat ).

A cost effective alternative for occasional use when compared to monthly or annual rental charges.

HOBBYWELD 5

This gas is recommended for use with sheet or thin sections of carbon/mild steel at a thickness of less than 7mm, making it the perfect choice for vehicle restoration.

Hobbyweld 5 is simple to use and provides fast travel speeds with minimal spatter, reducing your clean up time.

9 Litre Original – Deposit £70(no VAT) | 20 Litre Plus – Deposit £110(no VAT)

MIGOriginal (small)Plus (medium)
Cylinder size9 litre @ 137 bar20 litre @ 230 bar
Capacity1.40m³5.09m³
ConnectionRegulator RequiredRegulator Required

HOBBYWELD 15

For thicker sections of steel, making it more popular for general fabrication, repair and light trade applications.

This universal gas mix gives superb weld quality and excellent penetration together with minimal spatter and low fume levels.

9 Litre Original – Deposit £70(no VAT) | 20 Litre Plus – Deposit £110(no VAT)

MIGOriginal (small)Plus (medium)
Cylinder size9 litre @ 137 bar20 litre @ 230 bar
Capacity1.34m³4.86m³
ConnectionRegulator RequiredRegulator Required

Pure Argon

Most commonly used as a shielding gas for TIG welding stainless steel, carbon steel, aluminium and other non-ferrous metals.

Alternatively used on a MIG welder for aluminium in conjunction with the correct wire and consumables.

9 Litre Original – Deposit £70(no VAT) | 20 Litre Plus – Deposit £110(no VAT)

TIGOriginal (small)Plus (medium)
Cylinder size9 litre @ 137 bar20 litre @ 230 bar
Capacity1.32m³4.78m³
ConnectionRegulator RequiredRegulator Required

Oxygen

Oxygen is commonly and traditionally used with a fuel gas to support a wide range of applications, such as; cutting, brazing, soldering and welding (acetylene only).

Oxygen supports the combustion of fuel gas which enables a higher flame temperature to be achieved.

9 Litre Original – Deposit £70(no VAT) | 20 Litre Plus – Deposit £110(no VAT)

GASOriginal (small)Plus (medium)
Cylinder size9 litre @ 137 bar20 litre @ 230 bar
Capacity1.33m³4.82m³
ConnectionRegulator RequiredRegulator Required

Acetylene

The hottest, most efficient fuel gas on the market and the preferred product for most processes, including; cutting, heating, brazing and gas welding.

Benefit from improved cutting speeds, faster pre-heat times and extensive improvements to quality.

5 Litre Original – Deposit £120(no VAT) | 10 Litre Plus – Deposit £160(no VAT)

GASOriginal (small)Plus (medium)
Cylinder size5 litre10 litre
Capacity0.88m³1.77m³
ConnectionRegulator RequiredRegulator Required